2021+ KIA K5 2.5T TRUCONTROL BY STILLEN INLINE POWER MODULE – TC102024
Now with 14 Day Satisfaction Guarantee - Test it in your own vehicle completely risk free. Custom files available when purchasing other Stillen performance products.
Upgrade your Kia K5 2.5T with the TruControl by STILLEN Inline Power Module! STILLEN proudly introduces this state-of-the-art enhancement, meticulously tailored to elevate your K5 2.5T's performance effortlessly. By seamlessly integrating the Power Module into the factory wiring harness and precisely adjusting critical parameters, we unleash heightened boost pressure, delivering significant power and torque enhancements throughout the entire power band. And the cherry on top? Installation takes just 15 minutes with no requirement for specialized tools, cutting, or soldering.
But wait – there's more! We also provide tailor-made tuning files for performance components. With our expert tuning choices, you can fine-tune your K5 2.5T's performance to align with your individual driving preferences.
Here's the icing on the cake - the TruControl by STILLEN Inline Power Module won't compromise your factory warranty! Simply remove the product before dealership service visits, and your warranty remains fully intact. So, relish the advantages of amplified power and performance worry-free. The TruControl by STILLEN Inline Power Module is your gateway to the simplest and most cost-effective horsepower enhancement option for your K5 2.5T. Experience the transformation and unlock your car's true potential today!
Features and Benefits:
- +47 flywheel Horsepower gain*
- +49 ft. lbs. Torque gain at the flywheel*
- Very easy installation; Does not alter the factory ECU
- Bluetooth integration
- Free app with smartphone integration
- No wiring or specialty tools required
- Easy removal and reversible to maintain factory warranty
- Over-the-air Custom Tuning file for Stillen aftermarket parts (exhaust, intake, etc)
-
NOT FOR SALE IN CALIFORNIA
*Results may vary
The Numbers
From the factory the Kia K5 2.5T is rated at 290 flywheel horsepower. On our dyno we saw a maximum wheel horsepower output of 253 horsepower. After installing our TruControl by STILLEN Inline Power Module the dyno reported back a maximum horsepower output of 294 horsepower. Making the wheel horsepower greater than the factory flywheel horsepower with an overall gain of more than 47 flywheel horsepower* which equates to a total engine output of nearly 350 flywheel horsepower*.
Even greater gains come from the torque output. Maximum torque from the factory was measured at 294 torque. With the TruControl by STILLEN Inline Power Module installed. Our test K5 put down 337 ft. lbs of torque . This is an increase of nearly 50 ft. lbs of torque at the wheels*.
*Results may vary
Easy to Use
With the engine on or with the key on, you can go through and [-/+] select which calibration you want to run at any point in time. You can use the Tuning: Pro App which also controls and resets all calibrations based on what you input in the application.
The TruControl by STILLEN Inline Power Module comes preloaded with up to 7 different maps for your K5. These maps are going to range anywhere from Race mode to Sport mode to Eco mode.
English